yes it is the same exact thing.
eye lash glue/adhesive.
Saturday, February 27, 2010
Could someone please help me in finding a biodegradable adhesive or tape or glue?
I have to do a Physics project and my teacher is all into recycling and biodegradable materials, so one of the requirements of the project is that it's entirely made out of biodegradable materials. I need some form of adhesive (tape or glue or something similar) that I could use to bond two things together. I don't have time to order it over the internet and have it shipped to me, so it would be better if the adhesive were something I could purchase at Wal-Mart or Michael's, etc.
Please help me! I can't fail this project!
Thanks!Could someone please help me in finding a biodegradable adhesive or tape or glue?
the answer to all of lifes problems:
****
it totally fits the criteria that u provided! its def biodegradable too!microsoft word
Please help me! I can't fail this project!
Thanks!Could someone please help me in finding a biodegradable adhesive or tape or glue?
the answer to all of lifes problems:
****
it totally fits the criteria that u provided! its def biodegradable too!
How do you make urea carbamide glue? Does anyone have an MSDS for this adhesive?
Unless you are going to make a lot of it, it is much cheaper to just buy. You can get the MSDS from the manufacturer once you buy it. Here is a link to buy it:
So I did something dumb. Re-applying adhesive (just used krazy glue) to my throttle, and now it sticks.?
It has an exposed tip/side on the throttle. So I applied the krazy glue to the inside of the grip, twisted it on, and it held it. Turned it, now I have a throttle that'll stick almost wherever you leave it. I didnt realize it, but im sure that some of the superglue went into the springs/worked on the side of the throttle. so Ive been spraying it with goo be gone, and trying to get it to unstick. Not much luck so far, should I shoot some wd40 into it or what?
Really stupid situation I know, completely 100 percent my fault, but I could use some adviceSo I did something dumb. Re-applying adhesive (just used krazy glue) to my throttle, and now it sticks.?
hey no the best way to get krazy glue off is use Nail polish remover (acetone) trust me just pour some on a towel and wipe it off it will come right outSo I did something dumb. Re-applying adhesive (just used krazy glue) to my throttle, and now it sticks.?
Gonna have to replace the throttle...every time the sun hits it any tackiness in there is going to stick and you could get hurt if it gets stuck on high rpms when you are trying to stop.
Sorry dude....
Right next to superglue is a bottle called superglue remover (It's just acetone) , you MAY want to try that but who knows what that will do with the fluid around your springs.
Best bet- take it to a shop before harming your bike anymore.
Really stupid situation I know, completely 100 percent my fault, but I could use some adviceSo I did something dumb. Re-applying adhesive (just used krazy glue) to my throttle, and now it sticks.?
hey no the best way to get krazy glue off is use Nail polish remover (acetone) trust me just pour some on a towel and wipe it off it will come right outSo I did something dumb. Re-applying adhesive (just used krazy glue) to my throttle, and now it sticks.?
Gonna have to replace the throttle...every time the sun hits it any tackiness in there is going to stick and you could get hurt if it gets stuck on high rpms when you are trying to stop.
Sorry dude....
Right next to superglue is a bottle called superglue remover (It's just acetone) , you MAY want to try that but who knows what that will do with the fluid around your springs.
Best bet- take it to a shop before harming your bike anymore.
Terraium- What kind of silicone or adhesive is safe for pets for gluing the rocks together for a waterfall?
I am making a terrarium and I need to gluse the rocks together or silicone them , I can't find a product that's safe for pets . Please help. The project has come to a halt.Terraium- What kind of silicone or adhesive is safe for pets for gluing the rocks together for a waterfall?
you can use anything that is 100% silicone. With no mold preventitives or additives what so ever.... I do my fish tanks all the time. No problems. Can get them for under 5.00 at the hardware store.Terraium- What kind of silicone or adhesive is safe for pets for gluing the rocks together for a waterfall?
at any pet store or aquarium shop, you can buy sealant for aquariums. Good, good stuff.
you can use anything that is 100% silicone. With no mold preventitives or additives what so ever.... I do my fish tanks all the time. No problems. Can get them for under 5.00 at the hardware store.Terraium- What kind of silicone or adhesive is safe for pets for gluing the rocks together for a waterfall?
at any pet store or aquarium shop, you can buy sealant for aquariums. Good, good stuff.
Have purchased peugeot roof spoiler fixed by 2 screws and glue can you advise on strong adhesive to hold on?
epoxy resin has been mentioned can you comment regardsHave purchased peugeot roof spoiler fixed by 2 screws and glue can you advise on strong adhesive to hold on?
I'd use an adhesive sealant like sikaflex. It has a strong bond and allows for movement and vibration.Have purchased peugeot roof spoiler fixed by 2 screws and glue can you advise on strong adhesive to hold on?
not epoxy no,to inflexible.I'd use a product called';tiger seal';available from body shop motor factors.have used it successfully for years on everything from windshield to recalcient rubber trims that wont stay on.just dont get any on your fingers,takes 3-4 weeks to clean it off.
Get yourself a tube of windscreen bonding. Once its on it's a bugger to get off.
Go with Blackclo and get Tigerseal, it is what the body shops use.
I'd use an adhesive sealant like sikaflex. It has a strong bond and allows for movement and vibration.Have purchased peugeot roof spoiler fixed by 2 screws and glue can you advise on strong adhesive to hold on?
not epoxy no,to inflexible.I'd use a product called';tiger seal';available from body shop motor factors.have used it successfully for years on everything from windshield to recalcient rubber trims that wont stay on.just dont get any on your fingers,takes 3-4 weeks to clean it off.
Get yourself a tube of windscreen bonding. Once its on it's a bugger to get off.
Go with Blackclo and get Tigerseal, it is what the body shops use.
What is your substitute adhesive when you've no glue?
in jail we used toothpaste.What is your substitute adhesive when you've no glue?
The handy man's secret weapon! (Duct or electrical tape.)
Nails work, too.What is your substitute adhesive when you've no glue?
Duck Tape. Everything can be fixed with either Duck Tape or a paper clip.
Very cheap but very strong. Comes in a tube called liquid nails.
Staples.
Duct tape!
gum
The handy man's secret weapon! (Duct or electrical tape.)
Nails work, too.What is your substitute adhesive when you've no glue?
Duck Tape. Everything can be fixed with either Duck Tape or a paper clip.
Very cheap but very strong. Comes in a tube called liquid nails.
Staples.
Duct tape!
gum
What would be a better photo adhesive to use..glue stick, or double sided tape?
I am organizing all my photos into albums (not scrapbooks). The albums I picked out are plain thick brown paper so I have to stick the photos on with some kinds of adhesive. I want them to stay put for a very very long time and my experience with glue stick has been that sometimes things come a little loose. What do you think would be better for me to use for this project. The glue stick, or the double sided tape. I have no experience using double sided tape, so if you think that is the better choice, give me some tips to make the job easier...please :)What would be a better photo adhesive to use..glue stick, or double sided tape?
I would not use the glue unless it is specifically photo glue. Glue is messy, so it would not be my first choice. The glue stick would be my second choice because I don't think it is a secure, although I have run across a few that were. My first choice would be the double sided tape. It is clean and easy. You could use repositionable in case you ever wanted to change the photos. I know you think you won't, but I thought so also on some of my albums, and it turned out years later I did want to move them. Whatever choice you make, be sure it is acid free. This will protect the pictures from damage.What would be a better photo adhesive to use..glue stick, or double sided tape?
Buy an album with the page protectors ifyou want to avoid this question.
I'd say glue if you are decent at gluing, because tape can mark up the picture.
I would not use the glue unless it is specifically photo glue. Glue is messy, so it would not be my first choice. The glue stick would be my second choice because I don't think it is a secure, although I have run across a few that were. My first choice would be the double sided tape. It is clean and easy. You could use repositionable in case you ever wanted to change the photos. I know you think you won't, but I thought so also on some of my albums, and it turned out years later I did want to move them. Whatever choice you make, be sure it is acid free. This will protect the pictures from damage.What would be a better photo adhesive to use..glue stick, or double sided tape?
Buy an album with the page protectors ifyou want to avoid this question.
I'd say glue if you are decent at gluing, because tape can mark up the picture.
Is there any reason I can't put down good quality self-adhesive tiles over a glued down vinyl type floor?
The old floor is the original in a home built in 1978. It is glued down tight over a concrete slab. I have no idea if it has asbestos in it, so don't want to try to remove it.Is there any reason I can't put down good quality self-adhesive tiles over a glued down vinyl type floor?
Just as long as the old vinyl is thoroughly clean, your tiles can go down over the old floor. Need to use a good cleaner that will loosen up the old wax and dirt, and it will take some of the sheen off of the old floor. The tiles will stick well then.Is there any reason I can't put down good quality self-adhesive tiles over a glued down vinyl type floor?
If the existing vinyl is secure and in decent repair you can place the self-stick tiles directly to it. Just clean it well first.
Just a warining, the self-stick tiles tend to shrink very slightly over time creating gaps between tiles.
Everyone else pretty much answered your question pretty well but one thing I found that it will raise your floor about 1/8th of an inch. And for me that was enough so I couldn't have a rug in front of my back door. Just keep your clearances in mind. Otherwise good luck.
As long as you lay the tiles properly, you will end up w/ a very professional looking floor....always measure and start in the middle, placing tiles outward in even distribution. And be sure to double check the pattern; the backside of each tile will have an arrow on the paper backing, keep all arrows pointing in the same direction. the tiles will stick to the old flooring extremely well, as long as you give that old floor one last very good cleaning w/ a non-residue solution.
It will be fine.Continue with your project
Believe it or not you should prime it, they (floor store) have a special primer to make sure they adhere to your existing floor tile, check it out, good luck Les the painter
sand it good ,clean it good ,it will work ok!!
There is No reason that you can't go over the old vinyl with new stuff, EXCEPT, if the old floor covering is loose anywhere. If not, clean it real well and you'll be proud of your new floor and your handiwork.
Just as long as the old vinyl is thoroughly clean, your tiles can go down over the old floor. Need to use a good cleaner that will loosen up the old wax and dirt, and it will take some of the sheen off of the old floor. The tiles will stick well then.Is there any reason I can't put down good quality self-adhesive tiles over a glued down vinyl type floor?
If the existing vinyl is secure and in decent repair you can place the self-stick tiles directly to it. Just clean it well first.
Just a warining, the self-stick tiles tend to shrink very slightly over time creating gaps between tiles.
Everyone else pretty much answered your question pretty well but one thing I found that it will raise your floor about 1/8th of an inch. And for me that was enough so I couldn't have a rug in front of my back door. Just keep your clearances in mind. Otherwise good luck.
As long as you lay the tiles properly, you will end up w/ a very professional looking floor....always measure and start in the middle, placing tiles outward in even distribution. And be sure to double check the pattern; the backside of each tile will have an arrow on the paper backing, keep all arrows pointing in the same direction. the tiles will stick to the old flooring extremely well, as long as you give that old floor one last very good cleaning w/ a non-residue solution.
It will be fine.Continue with your project
Believe it or not you should prime it, they (floor store) have a special primer to make sure they adhere to your existing floor tile, check it out, good luck Les the painter
sand it good ,clean it good ,it will work ok!!
There is No reason that you can't go over the old vinyl with new stuff, EXCEPT, if the old floor covering is loose anywhere. If not, clean it real well and you'll be proud of your new floor and your handiwork.
Ardell Lashtite Adhesive False Eyelash Glue?
Okay, I love false eyelashes and used to wear them everyday.
Unfortunately for me, I became allergic to the latex that most glues use, so I bought this product.
I have used them once before and have a couple of questions:
Do I put the lashes on the actual skin of my eyelid next to the hair roots, or on the lashes themselves and NOT on the skin?
What's the easiest way to remove them? I tried it once and it didn't go so well. I used the removal that came with the adhesive and had a whole lot of trouble getting the eyelashes off.
I know that it's for individual lashes only, but what would happen if I used it with strip lashes? Is it okay or bad?
Thank you very much for your help :)Ardell Lashtite Adhesive False Eyelash Glue?
Hello!
I absolutely love false eyelashes and wear them 85% of the time :-)
When it comes to the Ardell Lashtite adhesive, it's better to apply the glue in between your eyelash hairs as opposed to on the actual skin of your eyelash. If it comes into contact of your tightline (wet skin that touches eyeball), it will slightly burn, so please be careful. The fumes can be a little overwhelming to some but you can get used to it and be sure to use just a little. A little goes a long way and can last for a couple of weeks, depending upon the person.
I would not recommend using the Lashtite adhesive on strip lashes because of the thickness of the fiber binding the lashes to create the strip. It will become extremely difficult and can irritate your eyelids when sleeping at night.
The easiest way to remove your eyelashes is with Lashfree remover. Simply dip a clean q-tip into the Lashfree bottle and rotate the moistened q-tip on the top of your eyelashes in a rolling motion. It is a bit time consuming to remove but its recommended this way as opposed to pulling. You can pull your actual eyelash hairs.
Be careful, and take your time. Practice makes perfect!
Be blessed
Unfortunately for me, I became allergic to the latex that most glues use, so I bought this product.
I have used them once before and have a couple of questions:
Do I put the lashes on the actual skin of my eyelid next to the hair roots, or on the lashes themselves and NOT on the skin?
What's the easiest way to remove them? I tried it once and it didn't go so well. I used the removal that came with the adhesive and had a whole lot of trouble getting the eyelashes off.
I know that it's for individual lashes only, but what would happen if I used it with strip lashes? Is it okay or bad?
Thank you very much for your help :)Ardell Lashtite Adhesive False Eyelash Glue?
Hello!
I absolutely love false eyelashes and wear them 85% of the time :-)
When it comes to the Ardell Lashtite adhesive, it's better to apply the glue in between your eyelash hairs as opposed to on the actual skin of your eyelash. If it comes into contact of your tightline (wet skin that touches eyeball), it will slightly burn, so please be careful. The fumes can be a little overwhelming to some but you can get used to it and be sure to use just a little. A little goes a long way and can last for a couple of weeks, depending upon the person.
I would not recommend using the Lashtite adhesive on strip lashes because of the thickness of the fiber binding the lashes to create the strip. It will become extremely difficult and can irritate your eyelids when sleeping at night.
The easiest way to remove your eyelashes is with Lashfree remover. Simply dip a clean q-tip into the Lashfree bottle and rotate the moistened q-tip on the top of your eyelashes in a rolling motion. It is a bit time consuming to remove but its recommended this way as opposed to pulling. You can pull your actual eyelash hairs.
Be careful, and take your time. Practice makes perfect!
Be blessed
When installation for vinyl when they say no glue needed do they mean no adhesive needed?
it say easy installation-no glueWhen installation for vinyl when they say no glue needed do they mean no adhesive needed?
their self adhesive better know as peel and stick. just make sure the floor is clean and take your time ,you only want to place them down once.if you try to raise them or move them it can get pretty messy.When installation for vinyl when they say no glue needed do they mean no adhesive needed?
it already has adhesive on it.you remove the paper lay it down.
You are correct. Good Luck!!!
their self adhesive better know as peel and stick. just make sure the floor is clean and take your time ,you only want to place them down once.if you try to raise them or move them it can get pretty messy.When installation for vinyl when they say no glue needed do they mean no adhesive needed?
it already has adhesive on it.you remove the paper lay it down.
You are correct. Good Luck!!!
Which Adhesive is used to Glue HDPE to HDPE?
we have an Industrial container of HDPE there are some cracks from where there is some leakage we want to arrest these leakage by Chemical Glue/adhesive please suggest the name of the glue and its availability in INDIAWhich Adhesive is used to Glue HDPE to HDPE?
http://www.innerduct.com/products/hdpe_g鈥?/a> - Pro-poly this glues just about any plastic
Most say that its very difficult to glue hdpe reliably but it may help if you used an oxidizer on the surface and then applied a glue
You could heat weld it together but i imagine this would be very difficult.
http://www.innerduct.com/products/hdpe_g鈥?/a> - Pro-poly this glues just about any plastic
Most say that its very difficult to glue hdpe reliably but it may help if you used an oxidizer on the surface and then applied a glue
You could heat weld it together but i imagine this would be very difficult.
What is the best adhesive to use when gluing a wood frame to a mirror?
If you are gluing the backing of the mirror to any part of the wood frame, you need to use mirror mastic so that the silver will not come off. If you are gluing the frame around the mirror, I would use either Locktite or a silicone based glue, like E6000 or plumbers goop. When I glued a frame around a bathroom mirror that was already adhered to the wall, I found Locktite's very fast grab to be the best because it was a difficult place to use clamps which most glues would require when adhering slick surfaces. But, if you can lay the mirror flat, just use clamps if you use a silicone based glue until it cures.What is the best adhesive to use when gluing a wood frame to a mirror?
I read this question and thought ';guerilla glue'; (don't know how to spell it) but Tucci already answered...lol...I use it for alot of stuff :)What is the best adhesive to use when gluing a wood frame to a mirror?
gorilla glue
Be aware some glues will eat away/damage the mirror.
Gorilla Glue is a popular multi surface adhesive. Keep in mind that many multi surface, high strength adhesives are also expansive when they dry. Loctite makes a product called Power Grab. It comes in a pressureized tube and shrinks only mildly when it dries. I don't know if it is speced for wood and glass...
why would you want to glue it? try to nail it with brads...
My favorite stuff is Liquid Nail, I use it for everything.
I've used the silicone adhesives and worked very good, even in an area that had a lot of vibration (in an industrial setting).
I read this question and thought ';guerilla glue'; (don't know how to spell it) but Tucci already answered...lol...I use it for alot of stuff :)What is the best adhesive to use when gluing a wood frame to a mirror?
gorilla glue
Be aware some glues will eat away/damage the mirror.
Gorilla Glue is a popular multi surface adhesive. Keep in mind that many multi surface, high strength adhesives are also expansive when they dry. Loctite makes a product called Power Grab. It comes in a pressureized tube and shrinks only mildly when it dries. I don't know if it is speced for wood and glass...
why would you want to glue it? try to nail it with brads...
My favorite stuff is Liquid Nail, I use it for everything.
I've used the silicone adhesives and worked very good, even in an area that had a lot of vibration (in an industrial setting).
What is the best method/adhesive to use when gluing bone with metal?
The objects in question are a shark tooth and a silver clasp.What is the best method/adhesive to use when gluing bone with metal?
An epoxy resin (such as Araldite) will probably wie you the best bond. Cyanoacrylate glues (superglues) will stick them but the join won't be as strong and will be more likely to break apart.What is the best method/adhesive to use when gluing bone with metal?
I know you can glue false teeth to a partial plate (metal) using cyanoacrylate glue, brand name, super glue. Seems like it would work.
An epoxy resin (such as Araldite) will probably wie you the best bond. Cyanoacrylate glues (superglues) will stick them but the join won't be as strong and will be more likely to break apart.What is the best method/adhesive to use when gluing bone with metal?
I know you can glue false teeth to a partial plate (metal) using cyanoacrylate glue, brand name, super glue. Seems like it would work.
What is the best adhesive for gluing onyx or other beads such as coral to gold or other metals?
like everything it depends. It depends on what the exact materials are, how closely they fit and what they are to be used for.
Let me explain. If you are going to stick a cabachon or domed stone with a flat back into a piece of jewellery that fits it exactly, then superglue (cyanoacrylate) will do - sets in seconds and loves gluing fingers so be careful. But this not usually used for items where durability and flexibility are needed.
You mention onyx and coral. Both of these are porous - will absorb moisture - So I would suggest that you look at using a two part epoxy resin glue. Make sure that both the stones and the metal are clean and free of grease. When I make up jewellery using gold plated or silver plated items I scratch the surface of the metal with emery paper underneath where the stone is to be set - so that the scratches can't be seen. Then I apply the glue to the metal - not the stone. That way you only put glue where its needed. Wipe off excess glue straight away OR leave until fully cured then cut off excess with a sharp knife. Even if you use a 5 minute epoxy, still wait 24 hours before using the jewellery.
Remember to check that the glue dries clear. Check coral for being colour fast as a lot of it is dyed and sometimes the dye comes out in the presence of certain chemicals.What is the best adhesive for gluing onyx or other beads such as coral to gold or other metals?
I've had success with Goop. It comes in a tube, in the jewelry or glue section of craft stores.What is the best adhesive for gluing onyx or other beads such as coral to gold or other metals?
krazy glue
Use two part epoxy. Although, if your metal is gold, platinum, or silver, please have the stone set by a professional (or learn how to set it). Glue is just such a cheap way to assemble jewelry. *shiver*
It's like cheating.
Let me explain. If you are going to stick a cabachon or domed stone with a flat back into a piece of jewellery that fits it exactly, then superglue (cyanoacrylate) will do - sets in seconds and loves gluing fingers so be careful. But this not usually used for items where durability and flexibility are needed.
You mention onyx and coral. Both of these are porous - will absorb moisture - So I would suggest that you look at using a two part epoxy resin glue. Make sure that both the stones and the metal are clean and free of grease. When I make up jewellery using gold plated or silver plated items I scratch the surface of the metal with emery paper underneath where the stone is to be set - so that the scratches can't be seen. Then I apply the glue to the metal - not the stone. That way you only put glue where its needed. Wipe off excess glue straight away OR leave until fully cured then cut off excess with a sharp knife. Even if you use a 5 minute epoxy, still wait 24 hours before using the jewellery.
Remember to check that the glue dries clear. Check coral for being colour fast as a lot of it is dyed and sometimes the dye comes out in the presence of certain chemicals.What is the best adhesive for gluing onyx or other beads such as coral to gold or other metals?
I've had success with Goop. It comes in a tube, in the jewelry or glue section of craft stores.What is the best adhesive for gluing onyx or other beads such as coral to gold or other metals?
krazy glue
Use two part epoxy. Although, if your metal is gold, platinum, or silver, please have the stone set by a professional (or learn how to set it). Glue is just such a cheap way to assemble jewelry. *shiver*
It's like cheating.
For thread beaded jewlery, what is the best adhesive to use after attaching clasps? Right now I use super glue
I use Bead Fix or E-6000. Both work great. I do usually use clamshells or beadtips at the end when I am working with threaded bead jewelry. After I slide the beadtip on I knot it tightly and add some glue to the knot and around the hole on the beadtip for extra security. The beadtips also lend a completed look than just a knot and they hook right onto the clasp.
Hope this Helps!For thread beaded jewlery, what is the best adhesive to use after attaching clasps? Right now I use super glue
Aleen's 16oz Tacky Glue
Hope this Helps!For thread beaded jewlery, what is the best adhesive to use after attaching clasps? Right now I use super glue
Aleen's 16oz Tacky Glue
Chair rail adhesive ?Super Glue?
Can I use Super glue to apply my polyurethane rails? The nails make a hole I can't see to fix and the liquid glue I bought doesn't seem to work.Chair rail adhesive ?Super Glue?
Liquid Nails is a good solution. Make sure you read the label and choose the right one. Some with solvents in them can eat away at foam, vinyl, plastic etc. These two will work:
Multi-Purpose Adhesive (BC-290)
Paneling %26amp; Molding (LN-606)
You may want to let it set for a few minutes before actually attaching it to the wall. If it still wants to slip simply apply a few pieces of masking tape until the adhesive sets up enough to hold the rail in place.Chair rail adhesive ?Super Glue?
Gorilla glue works the best. I used it to fix the pole on my bed 5 years ago and it is still holing strong.
Try some gorilla glue.
No, Super Glue does not offer the ability to flex with dryness and humidty so it'll eventually lose adhesion. There is a product called Liquid Nails available at hardware and home decorating stores that will do a much better job than Super Glue. Try that instead.
Get you a tube of Liquid Nail and a caulking gun. After you have marked your level line on the wall at the height that you want your rail, and have it cut to size, THEN apply the a bead of Liquid Nails on the back of your railing. Have someone help you hold it in place, and then secure it every 15'; or so with finishing nails.(They will have a tiny indentation in the head of them.) Get a ';nail set'; or use a big 16 penney nail to countersink your finishing nails~just below the surface~and then fill the holes with paintable caulking. Use a wet cloth or your finger to remove excess and smooth it out. If you are going with white, you may not even have to paint over it if you use white caulk:)
Good Luck!!
Super Glue (Cyanoacrylic) can damage polyurethane. Try contacting your local hardware and seek advise.
try construction adhesive, they make a variety for every purpose.
Loctite makes a product called PowerGrab that would work very well for your project. It is a construction adhesive much like Liquid Nails, but holds much better and is a lot less messy to use. I have used it on several remodeling projects, and I highly recommend it.
I would try Liquid Nails. It is in a tube found at your local hardware store or Wal-Mart. Super gule won't hold your chair rails.
Hope this helps..
Liquid Nails is a good solution. Make sure you read the label and choose the right one. Some with solvents in them can eat away at foam, vinyl, plastic etc. These two will work:
Multi-Purpose Adhesive (BC-290)
Paneling %26amp; Molding (LN-606)
You may want to let it set for a few minutes before actually attaching it to the wall. If it still wants to slip simply apply a few pieces of masking tape until the adhesive sets up enough to hold the rail in place.Chair rail adhesive ?Super Glue?
Gorilla glue works the best. I used it to fix the pole on my bed 5 years ago and it is still holing strong.
Try some gorilla glue.
No, Super Glue does not offer the ability to flex with dryness and humidty so it'll eventually lose adhesion. There is a product called Liquid Nails available at hardware and home decorating stores that will do a much better job than Super Glue. Try that instead.
Get you a tube of Liquid Nail and a caulking gun. After you have marked your level line on the wall at the height that you want your rail, and have it cut to size, THEN apply the a bead of Liquid Nails on the back of your railing. Have someone help you hold it in place, and then secure it every 15'; or so with finishing nails.(They will have a tiny indentation in the head of them.) Get a ';nail set'; or use a big 16 penney nail to countersink your finishing nails~just below the surface~and then fill the holes with paintable caulking. Use a wet cloth or your finger to remove excess and smooth it out. If you are going with white, you may not even have to paint over it if you use white caulk:)
Good Luck!!
Super Glue (Cyanoacrylic) can damage polyurethane. Try contacting your local hardware and seek advise.
try construction adhesive, they make a variety for every purpose.
Loctite makes a product called PowerGrab that would work very well for your project. It is a construction adhesive much like Liquid Nails, but holds much better and is a lot less messy to use. I have used it on several remodeling projects, and I highly recommend it.
I would try Liquid Nails. It is in a tube found at your local hardware store or Wal-Mart. Super gule won't hold your chair rails.
Hope this helps..
Subscribe to:
Posts (Atom)